What belongs in a PLC splitter BOM?

List the splitter ratio, package type, connector and polish, fiber type, input and output length, quantity, installation point, and any ODF, pigtail, adapter, drop cable or accessory items required with it.

Why should related ODN products be included in the same RFQ?

Including the related enclosure and connection items helps a supplier understand the installation context and makes it easier to compare a complete project quotation rather than disconnected product lines.

How should a buyer separate standard and project-specific PLC splitter items?

Use separate BOM lines for repeatable standard items and for project-specific items such as a particular package, connector, cable length, label or installation configuration. Keep the quantity and application on every line.

PLC Splitter BOM Checklist for FTTH / ODN Projects

Build the BOM Around the Installation Point

A PLC splitter line is easier to quote when a buyer first identifies where it will be installed: a distribution or terminal box, a splice closure, an ODF, a cabinet or a rack. That context determines which package format and connected items should appear beside the splitter in the BOM.

For example, an ODF-related line can be grouped with pigtails and adapters, while an access-network distribution line may need a splitter together with drop cable, fast connectors and installation accessories. Grouping does not prescribe a configuration; it gives the supplier enough project context to identify omissions or questions before quotation.

PLC Splitter Line: Fields to Put in Every RFQ

Split ratioState 1x2, 1x4, 1x8, 1x16, 1x32 or the required 2xN configuration.

PackageIdentify bare fiber, mini steel tube, ABS box, LGX cassette or rack-mount requirement.

InterfaceSpecify connector family and polish where connectorized.

Fiber and lengthInclude the required fiber type and input/output or pigtail length.

Quantity and useAdd line quantity plus the project, replenishment or installation application.

Commercial detailsNote packaging, labels, destination country and drawing or BOM reference when available.

Organize the Related Products Before Asking for a Quote

Use a separate section of the BOM for the products that connect to or house the splitter. This helps procurement teams compare like-for-like proposals and prevents a project list from being reduced to one isolated splitter line.

ODF or enclosure: describe the panel, box, cabinet or distribution-frame context for the splitter.
Fiber pigtails and adapters: list connector family, polish and quantity consistently with the intended interface.
FTTH drop cable: identify the cable items needed for the access portion of the project.
Fast connectors and accessories: add field-termination or installation items when they are part of the same scope.
Documentation: attach a line drawing, existing BOM or labeling convention if it removes ambiguity.

Common PLC Splitter BOM Mistakes

Listing a split ratio without a package type or installation context.
Using a connector name without stating the required polish when the project distinguishes it.
Omitting input/output length or pigtail length on a connectorized splitter requirement.
Combining multiple ratios or package styles in one line instead of assigning quantities to each.
Leaving ODF, pigtail, adapter or drop-cable requirements in a separate email with no shared BOM reference.
Requesting a quote without a quantity, application or destination detail.

Copyable PLC Splitter RFQ Checklist

Before sending your inquiry, confirm that the following information is available:

PLC splitter ratio, package type and line quantity
Connector family and polish, if applicable
Fiber type and input/output or pigtail length
Installation point and the relevant ODF, box, rack or cabinet
Related pigtails, adapters, FTTH drop cable, fast connectors and accessories
Project application, packing/label request and destination country
Any BOM, drawing or product-list reference that the supplier should follow