Buyer Guide · Europe
Fibre Patch Lead Colours: Jacket and Connector Colour Code for Europe
Fibre patch lead colours show the fibre type at a glance. Under TIA-598, singlemode (OS1, OS1a, OS2) leads are yellow, OM3 and OM4 are aqua, OM5 is lime green and OM1 or OM2 are orange. Many European cable makers add one difference: OM4 in Erika violet, called Heather violet in the UK. Connector bodies and boots follow a separate code: blue for singlemode UPC, green for APC and aqua for OM3/OM4. Colour is a guide, not a specification, so the jacket print and the order line still decide the fibre type.
Published 2026-11-14 · Last reviewed 2026-11-14 · By the Lumafyn Technical Team
Lumafyn products are made at an ISO 9001 / ISO 14001 / ISO 45001 certified production base (management-system certificates issued by NOA). The certificates cover the production base, not individual products.
View certificates →Fibre Patch Lead Colour Chart
The fibre patch lead colour chart has two parts: the jacket colour identifies the fibre category, and the connector body or boot colour identifies the fibre and polish at the plug. The TIA-598 and connector columns come from the Fiber Optic Association colour code page; the European column uses the sheath colours and RAL numbers printed in a Prysmian distribution cable datasheet, one example of common European practice.
| Fibre type | TIA-598 jacket | Common European jacket (Prysmian example) | Connector body / boot |
|---|---|---|---|
| OS1, OS1a, OS2 singlemode | Yellow | Yellow, RAL 1018 | Blue (UPC); green (APC) |
| OM1 62.5/125 | Orange | Grey, RAL 7037 | Beige |
| OM2 50/125 | Orange | Orange, RAL 2009 | Black |
| OM3 50/125 laser-optimised | Aqua | Aqua, RAL 6027 | Aqua |
| OM4 50/125 laser-optimised | Aqua | Erika violet, RAL 4003 | Aqua; violet in some European systems |
| OM5 wideband | Lime green | Lime green, RAL 6039 | Lime |

Jacket Colours by Fibre Type
A jacket colour is a recommendation for indoor premises cable and cords, not a guarantee of the fibre inside. The FOA summary of TIA-598 lists yellow for singlemode, orange for OM1 and OM2, aqua for laser-optimised OM3 and OM4, and lime green for OM5. It also notes that other colours may be used if the jacket print identifies the fibre, and that outdoor cables are generally black to resist UV light (FOA).
- Yellow means singlemode. It does not say whether the fibre is G.652.D or bend-insensitive G.657; see G.652.D vs G.657.
- Aqua means 50/125 laser-optimised multimode, OM3 or OM4. Under TIA-598 both share the colour, so read the print.
- Lime green is the OM5 wideband colour. Our OM4 vs OM5 guide covers when OM5 is worth specifying.
- Orange covers older OM1 and OM2 multimode. Mixing them is the classic fault colour coding was meant to prevent.
The colours of the individual fibres inside a multi-fibre cable are a different code. That sequence (blue, orange, green, brown and so on) is explained in our TIA-598 fibre colour code guide.
Why OM4 Is Violet in Europe
OM4 is often violet in Europe because the market adopted a separate colour to stop OM4 being confused with aqua OM3. Belden explains that OM4 kept the OM3 aqua when it was approved in 2009, so the European market introduced a violet known as Heather violet in the UK and Erika violet across much of mainland Europe, and applied it to cable, adapters and connector bodies.
The colour is RAL 4003. The Prysmian datasheet lists its OM4 cable in "Erika-Violet, RAL 4003" and also shows grey (RAL 7037) for OM1, where TIA-598 uses orange. Neither choice is wrong; they are different conventions. What matters is that one site uses one convention throughout.
| Point | Aqua OM4 | Erika violet OM4 |
|---|---|---|
| Where it is common | TIA-598-based specifications and many catalogues | The UK (Heather violet) and much of mainland Europe (Erika violet) |
| Optical performance | Same OM4 fibre category | Same OM4 fibre category |
| Risk on site | Easy to mix with OM3 at a panel | Clear split between OM3 and OM4 |
| What to write on the order | "OM4, aqua jacket" | "OM4, Erika violet (RAL 4003) jacket" |
US-style catalogues that list an "OM4 fiber patch cord" will usually default to aqua, so a European buyer who wants violet should name the colour and the RAL number on every line.
Connector and Boot Colours
Connector colours identify the fibre and the end-face polish, and they are the quickest check before two plugs are mated. The FOA colour code page gives beige for 62.5/125, black for OM2, aqua for OM3/OM4, lime for OM5, blue for singlemode and green for singlemode APC; its connector identifier lists the same blue and green convention for TIA-568.
- Green means APC. The 8° angled polish must never be mated with a blue UPC plug. See APC vs UPC.
- Blue means singlemode UPC. It is the normal choice for duplex LC leads to transceivers.
- Metal connectors (FC, ST) cannot be coloured, so the boot or strain relief carries the colour instead (FOA).
- Violet adapters and bodies are used in some European OM4 systems to match the jacket (Belden).

What Colour Does Not Tell You
Colour does not tell you the fire rating, the bend performance, the polarity or the connector grade of a patch lead. Those items have to be written on the order line:
| Item | Why colour is not enough | Where to read more |
|---|---|---|
| Fire performance | An LSZH lead and a PVC lead can share a colour | LSZH vs PVC jackets; CPR Euroclass |
| Bend-insensitive fibre | G.652.D and G.657 leads are both yellow | G.652.D vs G.657 |
| Duplex polarity | A-to-B and A-to-A leads look identical | A-to-B vs A-to-A |
| Armour | Armoured patch leads come in the same jacket colours | Armoured vs standard leads |
| Optical values | Insertion and return loss are measured, not seen | Reading insertion and return loss results |
Some sites colour leads by network instead of by fibre, for example one colour for a management network. That is allowed under the TIA-598 note quoted by the FOA, provided the jacket print still states the fibre type.
How to Write Colours on a Patch Lead Order
Write the fibre type first and the colour second, so the colour can never override the specification. A line we can quote without questions looks like this example from a UK distributor:
| Field | Example |
|---|---|
| Connectors and polish | LC/UPC to LC/UPC, duplex |
| Fibre | OM4 50/125 |
| Jacket | 2.0 mm LSZH, Erika violet (RAL 4003) |
| Boots / connector bodies | Aqua, or violet to match (state which) |
| Fibre type and your text, if required | |
| Length and quantity | 3 m; quantity per line |
| Colour availability, MOQ for special colours, lead time | Confirmed in your quotation |
- Fix the convention for the site. TIA aqua or European violet for OM4, grey or orange for OM1. Put it in the project specification.
- Name colours with a reference. "Violet" can be read as pink or purple; "Erika violet, RAL 4003" cannot.
- Ask for the print text. The printed legend is what an installer reads when the colour is in doubt.
- Check samples against the panel. Adapters and boots from different makers vary in shade.
Standard and custom colours for fibre patch leads and custom fibre patch leads are built in our own factory; the colours available for your order are confirmed in your quotation. For delivery, documents and how we work with European distributors and installers, see fibre optic supply for Europe.
FAQ
Fibre Patch Lead Colours FAQ
What colour is an OS2 fibre patch lead?
Yellow. TIA-598 uses yellow for all singlemode categories (OS1, OS1a and OS2), and European makers use the same yellow. The connector is usually blue for UPC or green for APC.
Why is my OM4 patch lead violet instead of aqua?
Because European practice often uses Erika violet (RAL 4003), called Heather violet in the UK, to separate OM4 from aqua OM3. The fibre performance is the same OM4 either way; only the colour convention differs.
What does a green connector on a patch lead mean?
Green means an APC connector with an 8 degree angled end face. Blue means UPC. The two must not be mated, because the angled and non-angled end faces do not make proper contact.
Is OM1 orange or grey?
TIA-598 lists orange for OM1 and OM2. Some European cable makers use grey for OM1, as shown in the Prysmian datasheet cited on this page. Read the jacket print to be sure.
Can I order fibre patch leads in a custom colour?
Yes, colour-coding by network or customer is common, and TIA-598 allows other colours if the jacket print identifies the fibre type. The colours we can supply for your order are confirmed in your quotation.
Sources and Further Reading
- Fiber Optic Association: fibre optic colour codes (TIA-598 jacket and connector colours)
- Fiber Optic Association: connector identifier and TIA-568 colour code
- Fiber Optic Association: reflectance and APC connectors
- Belden: who is Erika Violet and what is she doing in my data center?
- Prysmian D34 distribution cable datasheet: sheath colours and RAL numbers
Standards and public references describe definitions and industry practice; they are not Lumafyn product data. Optical values, MOQ and lead time for your order are confirmed in your quotation and test records.